Washing Machine Deep Cleaning: What to Clean and What to Avoid

You pull a fresh load of laundry out of the washer, expecting that clean, just-washed smell. Instead, your clothes have a faint musty odor. You check the detergent, switch fabric softeners, and even run another wash cycle. But somehow, the smell keeps coming back.

Here’s something many homeowners overlook: the washing machine itself might need a good cleaning.

Over time, detergent residue, fabric softener, lint, body oils, and moisture can accumulate inside your washer. Even when the drum looks clean, buildup may be hiding around the door seal, detergent dispenser, or drainage components.

If you’ve been searching for how to deep clean washer machine without damaging it, you’re in the right place.

The good news is that you don’t need to take your washer apart or buy a collection of cleaning products to get started. A proper deep clean usually involves a few targeted cleaning tasks, the appropriate washer-cleaning cycle, and better habits between laundry days.

In this guide, we’ll explain how to deep clean a washing machine step by step, what to do differently for front-load and top-load models, and how to keep unpleasant odors from returning.

Why Does Your Washing Machine Need Deep Cleaning?

Your washer spends its life cleaning dirty clothes, but that doesn’t mean it cleans itself completely during every cycle.

Think about what goes into a typical load: laundry detergent, fabric softener, sweat, skin oils, dirt, pet hair, and sometimes food stains.

Most of that material leaves with the wash water. However, small amounts can remain on internal surfaces.

Over time, residue can collect in areas that don’t dry quickly.

Front-load washers are particularly susceptible to moisture buildup around their rubber door gaskets. Meanwhile, top-load washers can develop residue around detergent dispensers, the tub rim, and other areas exposed to wash water.

According to LG’s washer maintenance guidance, excessive detergent use and insufficient maintenance can contribute to residue accumulation and unpleasant odors.

The manufacturer recommends regular cleaning of the detergent dispenser, door gasket, drain filter where applicable, and washing tub.

A deep clean addresses these areas instead of simply running another laundry cycle.

How Often Should You Deep Clean a Washing Machine?

For many households, cleaning the washer approximately once a month is a practical starting point. However, the manufacturer’s recommendations should always take priority.

For example, Samsung’s washer cleaning guide explains that its Self Clean reminder appears after:

  • 20 washes on applicable top-load models.
  • 40 washes on applicable front-load models.

Samsung also suggests running Self Clean at least monthly when the machine is used less frequently.

Meanwhile, LG recommends a monthly Tub Clean routine for many of its models.

These recommendations become easier to understand when you consider how often Americans do laundry.

According to ENERGY STAR, the average American family washes approximately 300 loads of laundry annually.

That’s about 25 loads per month.

With that level of use, a monthly washer-cleaning routine can be a sensible household habit.

Still, cleaning frequency should reflect your specific model, how often you wash clothes, and whether you notice residue or odors.

What You’ll Need to Deep Clean Your Washer

Before starting, gather a few basic cleaning supplies.

You don’t need anything particularly complicated.

Recommended supplies:

  • A soft microfiber cloth
  • A soft-bristle cleaning brush or old toothbrush
  • Mild dish soap or another manufacturer-approved surface cleaner
  • Warm water
  • A washing machine cleaner approved for your model
  • A shallow container and towels if your washer has an accessible drain filter
  • Cleaning gloves, if recommended by your cleaning product’s label
  • Your washing machine’s owner’s manual

Important safety reminder: Never combine bleach with vinegar, ammonia, or other cleaning products.

The Centers for Disease Control and Prevention (CDC) warns that mixing bleach with other cleaners can release dangerous fumes.

Also, avoid assuming that common household ingredients are automatically safe for every washing machine.

Some manufacturers recommend particular tub-cleaning products, while other models have self-cleaning cycles that don’t require any added cleaner.

Always follow the instructions for your specific washer.

How to Deep Clean Washer Machine: Step-by-Step Guide

Now that you’ve gathered your supplies, it’s time to clean the areas where detergent residue, dirt, and moisture tend to accumulate.

These steps apply broadly to household washing machines, but not every model has the same removable components.

If your owner’s manual provides a different procedure, follow that guidance.

Step 1: Empty the Washer and Inspect the Drum

Start by removing all clothing, towels, and other laundry items.

Look inside the drum for loose objects, lint, hair, or visible residue.

It’s surprisingly easy for small items to remain behind, particularly when you’re washing work clothes, children’s clothing, or bedding.

Check the accessible interior surfaces without removing protective panels or mechanical parts.

Use a soft, slightly damp cloth to remove visible dirt.

If you notice hard deposits or stubborn stains, avoid scraping the drum with abrasive tools. Instead, use a cleaning method approved by your washer’s manufacturer.

Also, check that the washer is not displaying an error code or holding standing water before proceeding.

If the machine isn’t draining normally, address that problem before attempting a cleaning cycle.

Step 2: Clean the Detergent Dispenser

The detergent drawer is one of the easiest areas to forget.

However, it’s also one of the most common places for soap residue and fabric softener buildup.

Over time, the residue can become sticky and difficult to rinse away.

First, check whether your dispenser is designed to be removed.

If it is, follow the manufacturer’s removal instructions.

Then:

  1. Remove the dispenser and any removable inserts.
  2. Rinse the components with warm water.
  3. Gently scrub stubborn residue with a soft brush.
  4. Wipe the accessible dispenser housing with a damp cloth.
  5. Rinse away loosened residue.
  6. Dry the components and reinstall them correctly.

Samsung recommends cleaning removable detergent-drawer components thoroughly at least once a month.

The company also notes that excessive detergent can cause buildup that affects detergent delivery and contributes to washer odors.

If your dispenser doesn’t come out easily, don’t force it. Some models use different locking or release mechanisms.

Step 3: Wipe Down the Rubber Door Gasket

If you own a front-load washing machine, this step deserves particular attention.

The rubber gasket around the door helps prevent water from escaping during a wash cycle.

Unfortunately, its folds can also hold moisture, lint, hair, and leftover detergent.

When cleaning the gasket, gently pull back the accessible folds and inspect the area.

You may find trapped lint, small objects, or residue that wasn’t visible from the outside.

Use a soft cloth dampened with water and a manufacturer-approved cleaner to wipe the accessible surfaces.

Pay attention to the lower portion of the seal, where moisture often collects.

Afterward, wipe the gasket dry.

Avoid sharp tools, abrasive brushes, and chemicals that aren’t approved for the gasket material.

If you find extensive mold growth, damaged rubber, or residue that can’t be removed safely, consult the manufacturer’s instructions or request professional help.

A damaged gasket can also cause water leaks, so check for cracks or areas where the seal no longer fits correctly.

Step 4: Clean the Drain Pump Filter if Your Washer Has One

Not every washing machine has a user-accessible drain pump filter.

However, some front-load models include a small service compartment near the bottom of the appliance.

This filter can collect lint, coins, buttons, and other debris.

When clogged, it may interfere with proper drainage and contribute to water remaining inside the washer.

According to LG’s drain pump filter instructions, the company recommends cleaning the drain pump filter approximately once a month on relevant front-load models.

If your washer has a serviceable filter, follow the model-specific procedure.

Typically, the process involves:

  1. Turning off the washer and disconnecting power as directed.
  2. Waiting for any hot water inside the machine to cool.
  3. Placing towels and a shallow container below the filter opening.
  4. Draining residual water through the designated emergency drain hose, if equipped.
  5. Removing the filter according to the manufacturer’s instructions.
  6. Rinsing away lint and trapped debris.
  7. Reinstalling the filter and securing the drain hose and cap.

Never remove a filter while the drum contains a significant amount of water. Water may spill out, and it can be hot.

If your washer doesn’t have an accessible drain filter, skip this step rather than trying to open the machine.

Step 5: Clean the Top-Load Washer’s Accessible Interior

Top-load washers need attention in different areas.

Without a front door gasket, the cleaning process may focus more on the upper tub rim, lid, dispenser area, and accessible agitator or wash plate surfaces.

Start by wiping the underside of the lid and the rim around the opening.

Next, inspect the accessible surfaces around the agitator or wash plate, depending on your washer’s design.

Remove visible residue with a soft cloth and mild, manufacturer-approved cleaner.

Avoid removing the agitator, wash plate, or other secured components unless the owner’s manual specifically provides a user-maintenance procedure.

For some models, internal buildup may require a dedicated cleaning cycle rather than manual scrubbing.

If the washer continues to leave dirt or debris on clothing after cleaning, there may be an underlying maintenance or mechanical issue.

Step 6: Run the Washer’s Cleaning Cycle

Once the accessible components are clean, it’s time to clean the drum and internal wash surfaces.

Many modern washing machines include a dedicated cleaning program.

Depending on the manufacturer, it may be labeled:

  • Tub Clean
  • Self Clean
  • Self Clean+
  • Clean Washer
  • Drum Clean

These programs are designed for washing machine maintenance, rather than washing clothing.

First, make sure the drum is completely empty.

Next, check your owner’s manual to determine which cleaning product, if any, should be used.

Some models recommend a washing machine cleaner. Others perform their self-cleaning cycle without added products.

Then, select the appropriate cleaning program and allow it to finish.

For example, Samsung reports that its Self Clean cycle takes approximately one hour on certain top-load models and four hours on certain front-load models.

Actual cleaning times vary by brand and model.

If the cycle finishes but visible residue remains, consult the manufacturer’s instructions before running another cleaning cycle.

Avoid combining multiple cleaning chemicals in an attempt to speed up the process.

Step 7: Clean the Exterior and Surrounding Area

While the drum and internal components get most of the attention, the exterior deserves a quick cleaning too.

Laundry detergent spills, dust, lint, and moisture can accumulate around the washer.

Wipe down the control panel with a soft cloth, taking care not to let liquid enter buttons or electrical openings.

Next, clean the lid or door, handles, and accessible exterior surfaces.

If it’s safe to do so, inspect the surrounding floor for moisture.

You can also look for visible water supply hose damage or dampness around connections without loosening or disconnecting them.

If you notice an active leak, don’t ignore it.

Cleaning the outside of a washer won’t resolve a damaged hose, loose internal component, or faulty water connection.

Step 8: Dry the Washer and Check the Results

You’ve cleaned the dispenser, gasket, accessible components, and drum. Now comes the part that helps prevent the same odors from returning.

Dry the accessible areas with a clean cloth.

Then, leave the door or lid open temporarily, provided it is safe to do so.

For front-load washers, leaving the detergent drawer slightly open can also help trapped moisture evaporate.

ENERGY STAR recommends leaving front-load washer doors ajar for approximately one to two hours after use to allow moisture to escape.

Keep children and pets away from open appliances, and don’t leave the washer accessible in situations where they could climb inside.

Finally, check for visible residue, unusual smells, and any signs of water leakage.

Your washer should now be ready for regular use, provided it operates normally and doesn’t show signs of a mechanical problem.

Front-Load vs. Top-Load Washer Cleaning: What’s Different?

Both washer types need regular maintenance, but their designs create different cleaning priorities.

Cleaning Area

Front-Load Washer

Top-Load Washer

Door gasket

Important cleaning area

Usually not applicable

Detergent dispenser

Clean removable drawer

Clean drawer or dispenser

Drain pump filter

Accessible on some models

Often not user-accessible

Drum or tub cleaning

Use model-specific cycle

Use model-specific cycle

Agitator or wash plate

Usually not applicable

Clean accessible surfaces

Moisture prevention

Dry gasket and air out door

Air out tub and lid

Neither design is automatically maintenance-free.

The better approach is to understand where residue collects in your washer and follow its recommended maintenance schedule.

Can You Deep Clean a Washing Machine With Vinegar and Baking Soda?

If you’ve searched online for washer-cleaning tips, you’ve probably seen tutorials recommending vinegar, baking soda, or bleach.

Some of these methods are popular because the ingredients are inexpensive and easy to find.

However, popularity doesn’t necessarily mean they’re appropriate for every machine.

Vinegar is acidic, and repeated use may be discouraged by certain appliance manufacturers because of compatibility concerns involving seals or other components.

Baking soda may help with some household cleaning tasks, but it isn’t a substitute for the manufacturer’s washer-cleaning program.

More importantly, never mix vinegar with chlorine bleach.

The CDC warns that bleach should not be mixed with other household cleaning products because dangerous chemical reactions can occur.

For regular deep cleaning, a safer approach is to use the recommended cleaning cycle and a cleaner specifically approved for your washer.

If your machine allows household cleaning ingredients, follow the manufacturer’s exact directions rather than guessing at quantities or combinations.

Why Does Your Washing Machine Still Smell After Deep Cleaning?

Sometimes, a washer smells better immediately after cleaning, only for the musty odor to return a few days later.

If that happens, there’s usually another factor worth investigating.

Too Much Detergent

Using more detergent doesn’t always make clothes cleaner.

In high-efficiency washers, excessive detergent can create residue that remains on internal surfaces.

Follow the detergent packaging and washer instructions, especially if your appliance requires HE detergent.

Moisture Remains Trapped Inside

A closed washer can retain moisture long after the cycle ends.

This is particularly relevant for front-load washers, where the door seal forms a tight barrier.

The U.S. Environmental Protection Agency (EPA) explains that controlling moisture is central to preventing indoor mold growth.

Although this guidance addresses indoor environments generally, the underlying principle is relevant to keeping laundry areas dry.

Wet Laundry Sits Too Long

Leaving damp clothing in the washer for hours can contribute to unpleasant odors.

Move laundry to the dryer or drying area promptly after the cycle finishes.

If you’ve forgotten a load and it smells musty, wash the items again according to their care labels.

The Washer Has a Drainage Problem

A blocked drain filter, restricted drain hose, or malfunctioning drain pump may allow water to remain inside the appliance.

That standing water can contribute to persistent odors.

If you notice slow drainage, unusual noises, or water remaining in the drum, cleaning alone may not solve the issue.

Hidden Buildup Needs Further Attention

Some residue is difficult to access through normal user maintenance.

If odors persist after several manufacturer-recommended cleaning attempts, the washer may need a more detailed inspection.

Don’t attempt to remove internal panels or sealed components without appropriate training.

How to Keep Your Washing Machine Clean Between Deep Cleaning Sessions

A monthly deep clean is useful, but everyday habits make a difference too.

Rather than waiting for an unpleasant smell to appear, try adding these simple tasks to your laundry routine.

After every laundry session:

  • Remove wet clothes promptly.
  • Wipe visible moisture from the door gasket.
  • Leave the door or lid open temporarily when safe.
  • Allow the detergent drawer to air out.
  • Wipe up detergent spills.

Weekly or as needed:

  • Check the drum for loose objects.
  • Remove visible lint and residue.
  • Inspect the accessible door seal.
  • Look for unusual moisture around the appliance.
  • Pay attention to drainage or spin performance changes.

Monthly or according to the manufacturer:

  • Run the dedicated washer-cleaning cycle.
  • Clean the detergent dispenser thoroughly.
  • Clean the drain pump filter if your model has a user-serviceable one.
  • Inspect accessible hoses and connections for visible damage.
  • Review any recurring odors, error codes, or performance issues.

These habits don’t require much time, but they can make washer maintenance easier to manage.

Does Florida’s Humidity Make Washing Machine Odors Worse?

Florida’s warm, humid conditions can make moisture management particularly important in laundry areas.

If your washer sits in a garage, utility room, or poorly ventilated space, damp surfaces may take longer to dry.

That can become a problem when moisture remains around the gasket, dispenser, or surrounding cabinetry.

The EPA recommends maintaining indoor relative humidity below 60%, with an ideal range of approximately 30–50%where practical.

You can review the agency’s guidance on indoor moisture and biological contaminants.

For Florida homeowners, a few additional habits can help:

  • Keep the laundry room ventilated.
  • Use air conditioning or a dehumidifier where appropriate.
  • Address plumbing leaks promptly.
  • Avoid leaving damp towels or laundry piled around the washer.
  • Allow accessible washer surfaces to dry between uses.

If your laundry area remains consistently damp, cleaning the machine alone may not address the wider moisture problem.

When Should You Call a Washing Machine Repair Technician?

Deep cleaning can help with ordinary residue, moisture, and some odor problems.

However, it cannot repair damaged mechanical or electrical components.

If your washer continues to malfunction after routine maintenance, professional diagnosis may be necessary.

Consider contacting a technician if you notice:

  • Water remaining inside the drum after a cycle.
  • Repeated drainage errors.
  • Water leaking from the washer or door seal.
  • Grinding, banging, or unfamiliar mechanical noises.
  • Excessive vibration during the spin cycle.
  • A washer that won’t start, fill, drain, or spin.
  • Error codes that repeatedly return.
  • Strong odors accompanied by drainage or mechanical problems.

For example, if your washer smells musty because it isn’t draining properly, repeatedly running a cleaning cycle may not address the underlying problem.

A blocked component, faulty pump, or another drainage issue may need attention.

Similarly, if the rubber door gasket is torn or leaking, cleaning it won’t restore its sealing function.

The goal is to recognize when maintenance ends and mechanical repair begins.

Need Professional Washing Machine Repair? Fixgenix Can Help

A washing machine that works properly makes laundry easier to manage. When it stops draining, starts leaking, or refuses to complete a cycle, even a simple household task can become frustrating.

If basic troubleshooting and regular maintenance haven’t solved the problem, professional appliance repair may be the next step.

Fixgenix provides residential and commercial appliance repair services for customers in its Florida service region.

The company focuses on diagnosing appliance problems, explaining repair requirements, and helping customers get their equipment working again.

Fixgenix also offers commercial washing machine repair services for businesses and facilities that rely on laundry equipment.

These services can be relevant for laundromats, hotels, apartment communities, and other commercial properties.

For residential washing machines, contact Fixgenix with your appliance brand, model number, and a description of the problem to confirm service availability.

Keep in mind that regular washer cleaning is a maintenance task you can often handle yourself. Professional repair becomes more appropriate when the machine develops persistent mechanical, electrical, or drainage problems.

Frequently Asked Questions

What is the best way to deep clean a washing machine?

Start by cleaning the detergent dispenser, door gasket where applicable, and accessible interior surfaces.

Next, clean the drain pump filter if your model has one, then run the manufacturer’s recommended washer-cleaning cycle with the specified cleaning product, if required.

Finally, wipe away moisture and let the washer air out safely.

How often should I deep clean my washer?

Many manufacturers recommend approximately monthly cleaning, although the exact schedule depends on the model and frequency of use.

Some washers also display reminders after a specified number of wash cycles.

Follow your owner’s manual for the recommended interval.

Can I use bleach to deep clean my washing machine?

Some manufacturers permit bleach for certain washer-cleaning procedures, while others specify a dedicated cleaner or a cleaning cycle without added chemicals.

Only use bleach if your appliance instructions explicitly allow it.

Never mix bleach with vinegar, ammonia, or another cleaner.

Why does my washing machine smell like mildew?

Common contributors include trapped moisture, excessive detergent residue, dirty dispensers, and drainage problems.

Regular cleaning and drying can help, but recurring odors may require further investigation.

Should I run my washing machine empty to clean it?

Yes. Dedicated washer-cleaning cycles are generally intended to run with an empty drum.

Do not add clothing during Tub Clean, Self Clean, or similar maintenance programs.

Follow the manufacturer’s directions for cleaning products and cycle settings.

How do I deep clean a front-load washing machine?

Focus on the rubber door gasket, detergent drawer, accessible drain pump filter, and drum-cleaning cycle.

After cleaning, dry the accessible surfaces and allow the door to air out when safe.

Can a dirty washing machine make clothes smell bad?

Yes. Residue and lingering moisture inside a washer can contribute to unpleasant odors that may transfer to freshly washed laundry.

However, odors can also result from laundry handling, detergent use, or drainage problems.

What if my washer still smells after multiple cleaning cycles?

Check for standing water, clogged accessible filters, door seal damage, and ventilation problems.

If the odor continues despite following manufacturer-recommended cleaning instructions, professional inspection may be appropriate.

Final Thoughts: A Cleaner Washer Starts With Better Maintenance

Learning how to deep clean a washing machine isn’t complicated, but it does involve more than wiping the drum or running an extra rinse cycle.

The areas you don’t usually see, such as the detergent dispenser, rubber door seal, and accessible drain filter, can collect residue and moisture over time.

By cleaning those components, using the appropriate washer-cleaning cycle, and allowing the appliance to dry between uses, you can help prevent recurring odors and keep your laundry routine running smoothly.

Just remember that every washing machine is different.

Always check the manufacturer’s maintenance instructions before using cleaning chemicals or removing components.

And if your washer develops leaks, drainage problems, unusual noises, or repeated error codes, don’t rely on cleaning alone to solve a mechanical issue.

Need Help With a Washing Machine That Isn’t Working Properly?

Contact Fixgenix to discuss your appliance problem and ask about professional repair services.

Call Fixgenix: (888) 230-2021

Website: www.fixgenix.com

Contact Fixgenix for Appliance Repair

A little routine maintenance can help keep your washer fresh. When an equipment problem goes beyond cleaning, getting the right diagnosis can help you decide what to do next.

Not sure what to do? Talk to our technician for advice